Wingstays!

 

It is time to install the front hubs, brakes, and wingstays.  I was excited to work on these - they are a big piece for the car.  To start off, I needed to find all the parts.  This took a little bit of time because I had to look through all the boxes to find each piece.

To install the pieces on the car, I first had to take the hub and brake and mount it on the car.  Unlike the rear, the front hubs come with the brakes mounted.  The bottom bolt was an easy fit, but getting the top wishbone in was a challenge. 

Bottom bolt

To make this easier, I lifted the whole lower wishbone up on the pump jack to better align the upper wishbone.

The last piece for this step was to mount the wingstay onto the hub.  This pieces only challenge was that the metal bracket was too tall to fit under the attachment arm.  To fix this, I bent the wingstay down then fit it under the attachment arm.